Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterSpring Repair in Woodland Hills, CA
Garage door spring repair in Woodland Hills typically costs $150 – $290 for a standard torsion spring replacement, and most jobs are completed the same day we hear from you. When a spring snaps, the door becomes dead weight, often stranding your car inside or leaving your home’s largest opening unsecured. Call (341) 888-6519 and we’ll give you a written price before any work begins, then back the repair with our 365-Day Done Right Promise.
Marlow Garage Door Repair Woodland Hills has handled spring failures across the 818 since 2002, from the oak-shaded streets south of Ventura Boulevard to the hillside homes off Mulholland. We’re the team neighbors call when the torsion spring, the horizontal coil above your door that does most of the lifting, gives out with a bang that sounds like a car backfiring. It’s a startling sound, and the fix requires real expertise. Our techs arrive in uniform, tell you their name before they walk up the driveway, and never touch a wrench until you’ve approved the written estimate.
Learn more about our broader Garage Door Repair in Woodland Hills services, or keep reading for how we handle spring work specifically.
When You Need Spring Repair
Springs are the muscle of your garage door system. They counterbalance the door’s weight so the opener only has to nudge it, not lift it. When a spring fails, here’s what homeowners across Woodland Hills notice first:
- You hear a loud bang from the garage. That’s the sound of a torsion spring snapping under tension. It’s often mistaken for a car hitting the door. If you heard it, inspect the spring above the closed door; you’ll likely see a visible break in the coil.
- The door climbs a few inches, then stops. Your opener is trying to lift what’s now 150 to 400 pounds of unbalanced steel. If you keep pressing the button, you’ll burn out the opener motor. Stop and call us.
- The door slams shut if you release it manually. A healthy door stays put at any height. A door that drops like a guillotine has zero counterbalance. That’s a broken spring, and it’s dangerous to keep operating.
- The door looks uneven or crooked mid-lift. In Woodland Hills, where temperature swings between cool canyon mornings and hot valley afternoons cause metal to expand and contract, springs fatigue predictably. A door that tilts as it opens often means one spring is carrying all the load.
- The cables look loose or have jumped the drum. When a spring snaps, the lift cables can slacken and slip off their spools. You’ll see a dangling cable or a frayed strand near the top of the tracks.
If any of this sounds like your Saturday morning, don’t force the door open or closed. Disconnect the opener and call (341) 888-6519. A live person answers, any hour.
Our Spring Repair Process
We built our process around what Woodland Hills homeowners told us they hate: four-hour windows, mystery technicians, and prices that change at the door. That same transparency applies to our Cable Repair work too. Here’s exactly how a spring repair goes with Marlow:
- You call or book online. A live person answers 24/7 and asks a few questions: What happened when the spring broke? One door or two? Make and model if you know it. You’ll get a live arrival window you can track on your phone, not a vague “sometime between noon and four.”
- Your tech arrives with the right parts. Because we service eight major brands including LiftMaster, Chamberlain, and Genie, the truck is stocked with the springs, winding bars, and hardware your specific door needs. We don’t do the “run to the parts store” routine.
- We inspect the full door system. Before we touch the spring, we check the cables, rollers, hinges, brackets, and opener. A spring often fails because something else wore out first, and replacing a spring without spotting a bent track or seized roller means you’ll be calling again in six months.
- You get a written price first. The number on the estimate is the number on the invoice. It includes parts, labor, and the spring’s cycle rating. You approve it on your phone or on paper before the first wrench turns.
- We replace and balance the door. The tech winds the new spring to the correct torque for your door’s weight and height, then tests the balance manually and with the opener. The door should hold at waist height, open smoothly, and close gently.
- You get before-and-after photos and a digital invoice. Pay from a texted link. The 365-Day Done Right Promise is applied to the repair in writing, covering parts and labor for a full year.
Spring Repair Pricing in Woodland Hills
What does spring repair cost in Woodland Hills? For most single doors with a standard torsion spring, replacement runs $150 – $290 including the part and labor. Two-spring systems, high-cycle springs, and oversized doors push the range to $300 – $450. You’ll see the exact number in writing before we start, and that number is locked. No “found something else while we were in there” surprise.
Several factors move the price:
- Spring type: Torsion springs cost more than extension springs but last longer and fail more safely. Most modern homes in Woodland Hills built since the 1990s use torsion springs.
- Cycle rating: Standard springs are rated for about 10,000 cycles, roughly seven to ten years of use. We can install higher-cycle springs rated for 25,000 to 50,000 cycles for a modest upcharge, which makes sense if you park daily and use the door several times a day.
- Door size and weight: A double car garage door on a hillside home off Topanga Canyon needs beefier springs than a single door on a flat cul-de-sac near El Camino Real High School.
- One spring or two: If one spring on a two-spring system snapped, we strongly recommend replacing both. The other spring has the same wear and is close to failing too. Replacing both now costs less than a second service call later.
Every spring repair includes a free estimate and the 365-Day Done Right Promise. If the new spring fails within a year, we return and fix it at no charge. Written, not verbal.
FAQs – Spring Repair
How much does garage door spring repair cost in Woodland Hills?
Garage door spring repair in Woodland Hills typically runs $150 – $290 for a standard single torsion spring replacement, and $300 – $450 for two-spring systems or high-cycle upgrades. The exact price depends on your door’s weight, spring type, and whether one or both springs need replacement, and we provide a written quote before starting. Call (341) 888-6519 for a free estimate; you’ll see the number on a digital invoice you can pay from your phone.
Can you replace a garage door spring the same day?
Most spring replacements in Woodland Hills are completed the same day you call, and in many cases within a few hours. Our trucks carry a full stock of torsion and extension springs for LiftMaster, Chamberlain, Genie, and Raynor doors, so there’s no waiting on a parts run. Call (341) 888-6519 and a live person will confirm today’s availability and give you a trackable arrival window.
Is it cheaper to replace just one spring instead of both?
Replacing one spring costs less upfront, typically $150 – $200 in Woodland Hills, but both springs on a two-spring door usually wear at the same rate, so the remaining spring is likely to fail soon. Replacing both at once costs $250 – $400 but avoids a second labor charge and a repeat service call. We’ll show you both options in writing, and you decide before we start.
Can I replace a garage door spring myself?
We don’t recommend it. Torsion springs are wound under hundreds of pounds of tension, and without the proper winding bars and experience, the spring can release that energy suddenly, causing severe injury. Even experienced homeowners misjudge the required torque and end up with a door that slams or an opener that strains. Call (341) 888-6519 and let a trained Marlow tech handle it safely, with a written guarantee.
Why did my garage door spring break?
Springs break because they have a finite cycle count, usually around 10,000 open-close cycles, which translates to seven to ten years in most Woodland Hills homes. Temperature swings between the valley floor and the canyon side accelerate metal fatigue, and rust from coastal moisture shortens the lifespan further. If your spring is older than seven years and you use the door daily, it owes you nothing at this point. Call (341) 888-6519 and we’ll replace it with a spring rated for the cycle count that matches how you use the door.
If you’re dealing with a snapped spring, call (341) 888-6519 now. We’ll give you a written price, a live arrival window, and a 365-Day Done Right Promise in writing before any work starts. Marlow Garage Door Repair Woodland Hills is the only garage door service in the 818 that gives you full visibility from the moment you book to the moment you pay, and we’ve been doing it since 2002.
Written by Jaylen Ross, Owner at Marlow Garage Door Repair Woodland Hills, serving Woodland Hills.